Element XR

Double-focusing magnetic sector HR-ICP-MS with extended dynamic range.

• Status: Active
• Country: Germany
• Isotopic: Yes
• Elemental: Yes
• Analyte Type / Target Of Analysis: Metals and non-metals
• Measurable Isotopes/Elements: Includes rare earths, transition metals, and actinides
• Analyzer Type
  : Magnetic Sector MS
• Ion Source Type: Inductively Coupled Plasma
• Signal Stability / Relative Standard Deviation
  : <1% over 10 minutes, <2% over 1 hour
• Inlet Types: Compatible with HPLC, GC, laser ablation, and autosamplers
• High Resolution
  : Yes
• Mass Resolution/ Mass Resolving Power
  : Fixed resolutions: 300 (low), 4,000 (medium), 10,000 (high)
• Sensitivity
  : > 1 x 10⁶ cps/ppb In
• Dynamic Range
  : > 10¹² linear dynamic range
• Detection Limits
  : Down to ppq levels for non-interfering isotopes
• Detector Type
  : Dual mode secondary electron multiplier with Faraday detector for extended dynamic range
• Acceleration Voltage (KV)
  : 8
• High Matrix Introduction System (HMI)
  : optional
• Spray Chamber
  : Cyclonic spray chamber
• Nebulizer
  : Concentric nebulizer
• Torch
  : Torch with a grounded guard electrode
• Interface
  : Optional Jet interface
• RF Generator Frequency (MHz)
  : 27
• RF Generator Power (W)
  : 2000
• Geometry Type
  : Nier-Johnson geometry
• Focusing Type
  : Double focusing (magnetic and electrostatic)
• Magnetic Sector Radius/ Angle
  : 160 mm/ 60 deg
• Electric Sector Radius/ Angle
  : 105 mm/ 90 deg
• Cooling System
  : Water-cooled
• Vacuum System
  : Fully turbo-pumped system
• Gas Supply: High-purity argon (>99.996%), optional N2 (for pneumatic)
• Reaction Cell System: No
• Power Specifications: 230/400 V ±10 %, 3-phase, 50/60 Hz, fused 32 A per phase
• Environmental Specifications: Temperature: 18–24°C; humidity: 50–60%, non-condensing
• Physical Specifications: 1741 mm (width) x 880 mm (depth) x 1410 mm (height)